Tweet
does anyone know if you can get 10mm wheel spacers where you can use the original length wheel bolts and locking nuts?
-
-
yes you can speak to imran -
I can't see why you'd want to do that. The spacers fit between the wheel hub and the wheel, therefore you need longer wheel nuts to account for the thickness of the spacer.Originally posted by ron burgandy View Post/// Exdos ///
"Men who try the impossible and fail spectacularly are infinitely superior to those who reach for nothing and succeed" --Napoleon BonapartComment
-
-
when the car was is in the garage for a service last november they put new original locking nuts because they said the old ones were no good so i replaced all the other bolts as well which cost about £50 now i fancy putting spacers on.
i was hoping to use these new bolts but i'll just buy longer bolts thanks for your repliesComment
-
cant you get the spacers that bolt to the hub and then the wheels bolt to the spacer using the original bolts????
I am sure i have seen ones like this before but i have no idea which are best for reliability/safety.
RegardsEX: S50 Black with Kyalami Orange/Black Leather. Becker Bluetooth/Ipod HU.
Now: S50 Black/Black with Ap Racing brakes and Race logicComment
-
Originally posted by David1975 View Post
Yes, but that type of fitment is usually only for spacers over 20mm (10mm is too thin to make the bolt on hub kind of fitment possible).Comment
-
And, the spacers are made from Aluminium and I certainly wouldn't want to bolt my wheels to that metal./// Exdos ///
"Men who try the impossible and fail spectacularly are infinitely superior to those who reach for nothing and succeed" --Napoleon BonapartComment
Comment