Hello everyone!
VANOS was rebuilt in Dr.Vanos, but the engine does not run smoothly, no full power, it consumes too much fuel, a detonation from the muffler and exhaust camshaft is at 9 degrees instead of zero ...
When the exhaust cam set at zero degrees, remains in that position only until the engine starts ...
I measured the oil pressure at idle VANOS and he is 100 bar, and when you add gas to about 3000-4000 rpm then it is about 90 bar ...
At diagnosis throws error computer (ECU) ...
Does anyone know what could be the problem?Solenoids-circuit wiring, badly fitted VANOS,or something else?
Thanks!
VANOS was rebuilt in Dr.Vanos, but the engine does not run smoothly, no full power, it consumes too much fuel, a detonation from the muffler and exhaust camshaft is at 9 degrees instead of zero ...
When the exhaust cam set at zero degrees, remains in that position only until the engine starts ...
I measured the oil pressure at idle VANOS and he is 100 bar, and when you add gas to about 3000-4000 rpm then it is about 90 bar ...
At diagnosis throws error computer (ECU) ...
Does anyone know what could be the problem?Solenoids-circuit wiring, badly fitted VANOS,or something else?
Thanks!
Comment