Announcement

Collapse
No announcement yet.

S50 Expansion tank vent pipe

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • S50 Expansion tank vent pipe

    I have just replaced the vent pipe from the radiator to the expansion tank and as usual realoem details are not very clear so if any else needs to replace at some stage here's some more info,

    part number 20 (part number 17 not needed)


    http://www.etk.cc/bmw/EN/search/sele...CE/17/17_0102/


    vent pipe S50 RHD part number 17112228383 comes with both small rubber hoses already connected at either end, it says you need to order 2 clips at the same time but these should still be fitted to the inner wing so no need for anymore. The steel hose clamps can be replaced with either jubilee type as listed on realoem or you can replace with the factory clamps which are part number 16121180240 but you will need special pliers to fit these. The clamps have small black plastic covering caps fitted which are part number 17121719356 which are listed on realoem but no picture shown.




    Not sure if the radiator hose has one fitted as all the pictures I can see show a bare clip. The S54 and LHD use a different hose so these details only apply to S50 RHD models
Working...
X