hello and help.just fitted porsche /brembo rears ,correct serial number and e36 m3 brackets from creation motosport.i have rigged these up with standard disc as am waiting for a e46 m3 328mm(if anyone has a pair let me know)and obviously the pads stick out past the disc.however the real issue is that the calliper is slightly off centre of disc,possibly 4mm.heading outwards.is this due to standard disc or is bracket incorrect,cheers jess
Announcement
Collapse
No announcement yet.
rear bbk
Collapse
X
-
The brackets look the same as the rallyroad supplied version, there are some pictures and a fitting guide on their website which may help
http://www.rallyroad.net/content/e36...rembo-brackets
-
-
e46 m3 are 185 internall diameter and e36 are 180.i fitted new shoes and adjusted them and they now work.the other problem i had is that the disc retaining screw did not align up so had to drill new hole through disc centre.also my callipers are not centrall to discs,they both protrude outwards by 3 to 4 mm,they work fine but job took longer than i thought it would however still happy with results.
Comment
-
Originally posted by jess robson View Poste46 m3 are 185 internall diameter and e36 are 180.i fitted new shoes and adjusted them and they now work.the other problem i had is that the disc retaining screw did not align up so had to drill new hole through disc centre.also my callipers are not centrall to discs,they both protrude outwards by 3 to 4 mm,they work fine but job took longer than i thought it would however still happy with results.
Comment
-
Originally posted by jess robson View Postyes its easy but it has to be acurate or the wheel bolts will not pass through disc.i used the old disc as a template.i was surprise how easy it drilled ,ithen countersunk the face and used a countersunk allen head.it isn t that important as it all clamps together with wheel studs.
Comment
Comment